Power over Ethernet (PoE) smart control panels simplify wiring by combining power and data transmission into a single cable. This guide covers the installation process, best practices, and troubleshooting tips.

Installation Steps

  1. Planning the Location

    • Choose a central location (e.g., living room or hallway) near your router for optimal connectivity.

    • Ensure the spot has good Wi-Fi coverage if the panel supports wireless backup.

  2. Running Ethernet Cables

    • Use Cat6 or higher cables for stable data transfer.

    • Connect the panel to a PoE-enabled switch (e.g., PortWorld PW-PoE-Switch).

  3. Mounting the Panel

    • Secure the panel to the wall using included brackets.

    • Avoid obstructions that may interfere with signal reception.

  4. Powering On & Configuration

    • Plug the Ethernet cable into the PoE switch—no separate power adapter is needed.

    • Follow the manufacturer’s app (e.g., PortWorld Smart Home App) to complete setup.

Troubleshooting Tips

  • No Power? Check if the PoE switch supports 802.3af/at standards.

  • Connection Drops? Test the cable with a network tester.

Why Choose PoE?

  • Reduced Wiring: No need for separate power cables.

  • Reliability: Stable connection compared to Wi-Fi-only panels.

4 inch  Smart Home Touch Control Panel
5 inch Smart Home Touch Control Panel
5.5 inch Smart Home Touch Control Panel
6 inch Smart Home Touch Control Panel
7.6 inch Smart Home Touch Control Panel
8 inch Smart Touch Control Panel